Baroxon® EU | Smart Boom Barriers & Access Control

banner

Boom Barrier Duty Cycle Explained: What 100% Duty Cycle Really Means

Duty cycle is the single specification that decides whether a boom barrier survives a toll lane. This guide explains how duty cycle is measured, how to size it from your traffic profile, and what 100% duty actually requires in motor and gearbox design.

19

2026

/

10

Boom Barrier Motor Types Compared: AC Induction vs Brushless DC vs Servo

AC induction, brushless DC and servo drives are the three motor technologies used in boom barriers. This comparison covers cycle life, efficiency, noise, cold-start behaviour and control accuracy so you can match the drive to the lane.

19

2026

/

10

EN 12453 and EN 12445 Compliance for Power-Operated Gates in the EU

Power-operated gates and boom barriers placed on the EU market must satisfy the Machinery Directive 2006/42/EC. EN 12453 defines the required safety levels and EN 12445 the test methods. This is the practical checklist for specifiers.

19

2026

/

10

ANPR Camera Placement: Engineering a 99% Plate Read Rate

Automatic number plate recognition accuracy is decided by geometry before it is decided by software. This guide sets out the capture angles, plate resolution, shutter speed and illumination that produce a 99% read rate at the lane.

19

2026

/

10

Barrier Arm Length vs Opening Speed: The Engineering Trade-off

Opening speed and arm length pull against each other through a single constraint: tip speed. This article explains the trade-off, when to specify articulated or folding arms, and how to size a barrier for the lane width and ceiling height you actually have.

19

2026

/

10

Vehicle Detection Compared: Inductive Loop vs Radar vs Photocell vs ANPR

Inductive loops, microwave radar, infrared photocells and ANPR cameras can all trigger a barrier. This comparison covers detection accuracy, installation disruption, response time and motorcycle performance so you can select the right sensor for the lane.

19

2026

/

10

Contact Us

Our passion is to bring your ideas to life. Work with our design team to create a one-of-a-kind custom finish or cladding system to create a truly unique space. Together we can make your story stand out. If you need something to request a sample, request pricing, or request a demo, please fill out the contact form below. Explain your request in as much detail as you can and a representative will contact you within 1 business day.